Nikon D3100 (18-55mm Kit) 사용자 설명서

92

t

D

If no operations are performed while the displays are flashing, direct measurement mode 
will end when the exposure meters turn off. The auto meter-off delay can be changed using 
the Auto off timers option in the setup menu (

0 143). The default setting is eight seconds.

D

The camera can store only one value for preset white balance at a time; the existing value will 
be replaced when a new value is measured. Note that exposure is automatically increased 
by 1 EV when measuring white balance; when shooting in mode M, adjust exposure so that 
the exposure indicator shows ±0 (

0 77).

A

To enter preset measurement mode (see above) after selecting preset white balance in the 
information display (

0 87), press J for a few seconds. If white balance has been assigned to 

the Fn button (

0 146) and preset white balance selected by pressing the Fn button and 

rotating the command dial, the camera will also enter preset measurement mode if the Fn 
button is pressed for a few seconds.

A

In studio settings, a standard gray panel can be used as a reference object when measuring 
preset white balance.