JVC GY-HMQ10E 사용자 설명서

FORMAT ERROR!

0

Check the operating procedure, and perform once again.

0

Turn off and on this unit again.

MEMORY CARD

ERROR!

0

Check that the card is supported by this unit.

0

Turn off and on this unit again.

0

Remove and re-insert the SD card.

0

Remove any dirt from the SD card terminals.

0

If the above does not solve the problem, back up your files and execute “FORMAT SD CARD” in the

recording menu. (All data will be deleted.)

NOT FORMATTED

0

Select “YES”, then select “YES” on the “DO YOU WANT TO FORMAT?” screen.

RECORDING FAILURE

0

Turn off and on this unit again.

UNSUPPORTED

SCENE!

0

Use files recorded with this unit.

(Files recorded using other devices may not be playable.)

UNSUPPORTED FILE!

0

Use files recorded with this unit.

(Files recorded using other devices may not be playable.)

THIS FILE IS

PROTECTED

0

Cancel protection using “PROTECT/CANCEL” in the common menu.

CHECK CARD'S WRITE

PROTECTION SWITCH

0

Set the write protect switch of the SD card to off.

INSUFFICIENT

AVAILABLE SPACE

0

Delete files, or move files to a PC or other devices.

0

Replace the SD card with a new one.

SCENE QUANTITY

EXCEEDED LIMIT

0

Move the files or folders to a computer or other device.

(Back up your files.)

0

Select “FILE + MANAGEMENT NO” in “FORMAT SD CARD” of the common menu.

(All data on the SD card will be deleted.)

NUMBER OF FOLDERS

OVERFLOW

0

Move the files or folders to a computer or other device.

(Back up your files.)

0

Select “FILE + MANAGEMENT NO” in “FORMAT SD CARD” of the common menu.

(All data on the SD card will be deleted.)

FILE QUANTITY LIMIT

EXCEEDED

0

Move the files or folders to a computer or other device.

(Back up your files.)

0

Select “FILE + MANAGEMENT NO” in “FORMAT SD CARD” of the common menu.

(All data on the SD card will be deleted.)

THIS CARD CANNOT

BE USED FOR

RECORDING OR

EDITING ON THIS

CAMERA

The frame rate of this unit is different from the frame rate recorded on the card.

Change the frame rate in “SYSTEM SELECT” of the recording menu.

THIS CARD CANNOT

BE USED FOR

RECORDING ON THIS

CAMERA

The number of MP4 files on each card is different in the 4K2K mode.

Use a computer to adjust the files on the four cards to a consistent number.