Insignia NS-BIPCD01 사용자 설명서

Quick Setup Guide

l

Battery door/compartment

Please read these instructions carefully before using this product and retain them in a safe place for 
future reference.

This product can be powered by either the included AC power adapter (100/240V, 50-60Hz), or by 
six “C” size alkaline batteries.

1  Open the battery compartment on the bottom of your boom box.
2  Insert 6 “C” size alkaline batteries (not supplied) into the battery compartment, observing the correct 

polarity as indicated inside the battery compartment.

3  Close the battery compartment.

Notes: Ensure the compartment cover is securely fitted. When you replace the batteries, make sure you replace them all at the 
same time and with the same type of battery. If the product is not to be used for an extended period of time, the batteries should 
be removed to prevent any possible damage to the product from corrosive leakage which will invalidate the warranty. When the 
batteries reach 20% of capacity, a low battery icon flashes to let you know to change batteries.

1  Plug one end of the AC power adapter into the DC 9V jack on the back of your boom box.
2  Plug the other end into an AC power outlet.

1 Press the POWER button to turn the boom box ON.
2 Press POWER again to turn the boom box OFF when finished listening.

Press the VOLUME +/- buttons to the desired level.

1  Using an audio cable with a 3.5 mm stereo plug (not provided), connect the external audio 

equipment to the AUX IN jack on the back panel of your boom box. 

2  Repeatedly press the SOURCE button until AUX appears in the display. Audio plays through the speakers.

Use headphones with a 3.5 mm plug (you may need to buy an adapter if your headphones are different). 
The speakers are automatically switched off when the headphones are being used.

Caution: Listening to high volume sound for long periods of time can damage your hearing.

1 Press the POWER button to turn the boom box ON. The LCD display turns on.
2 Repeatedly press the SOURCE button until the FM mode is selected.
  Example: FM mode

3  Press the        /        buttons to tune to the desired station.
 Auto 

  Press the        /        buttons momentarily and release. The tuner will move up or down by 0.2 MHz 

continually until stop at next/previous exist station. 

  Press and hold the        /        buttons until the display approaches your desired station. Tap the buttons 

repeatedly until the display shows the exact frequency.

4  When you have finished listening, press the POWER button to turn the boom box OFF.

- 

+

- 

+

- 

+

- 

+

- 

+

- 

+

FM rod 

antenna

Handle

iPod 
compartment
iPod holder

LCD Display

CD door

Speakers

Speakers

DC 9V jack

AUX IN jack

Headphone jack

Before using your new product, please read these 

instructions to prevent any damage.

Congratulations on your purchase of a 
high-quality Insignia product. Your 
Boom Box with iPod Dock/CD is 
designed for reliable and trouble-free 
performance. Use this guide for initial 
setup. 

•  Boom box with iPod Dock/CD
•  AC power adapter
•  Quick Setup Guide

“Made for iPod” and “Made for iPhone” mean that an 
electronic accessory has been designed to connect 
specifically to iPod or iPhone, respectively, and has been 
certified by the developer to meet Apple performance 
standards. Apple is not responsible for the operation of 
this device or its compliance with safety and regulatory 
standards. Please note that the use of this accessory with 
iPod or iPhone may affect wireless performance.