Cannon 1904032 사용자 설명서
4
Mounting to Cannon Track Mount
For versatility and lightening quick mounting, the Cannon Mounting
Track system is ideal for utilizing your pedestal mount on your boat. Slide the
base of the pedestal into the track and tighten the thumb screws to fix the pedes-
tal in position. You may use a 3/16” Allen wrench for additional tightening.
base of the pedestal into the track and tighten the thumb screws to fix the pedes-
tal in position. You may use a 3/16” Allen wrench for additional tightening.
Note: For the Swivel Pedestal Mount, rotate the release handle to access the top of
the thumb screw with the Allen wrench.
the thumb screw with the Allen wrench.
1904025 Aluminum Mounting Track 6”
1904026 Aluminum Mounting Track 12”
1904027 Aluminum Mounting Track 18”
1904028 Aluminum Mounting Track 24”
1904029 Aluminum Mounting Track 36”
Cannon tracks allow for flexible mounting positions and easy
removal of Cannon’s track system accessories. Locking grooves allow
thumb screws to index with track and prevent accessories from twisting.
The system is compatible with Cannon, Bert’s, and Traxtech track system
products. Components are made from clear anodized aluminum and
stainless steel for strength and corrosion resistance. All mounting hard-
ware included. Available in 6, 12, 18, 24, and 36 inch lengths.
thumb screws to index with track and prevent accessories from twisting.
The system is compatible with Cannon, Bert’s, and Traxtech track system
products. Components are made from clear anodized aluminum and
stainless steel for strength and corrosion resistance. All mounting hard-
ware included. Available in 6, 12, 18, 24, and 36 inch lengths.
Mounting to Cannon Deck Mount
The Cannon Deck Mount works great for adding stability and easy removal of your pedestal mount. With
your Cannon Deck Mount installed on your boat, attach your pedestal mount by removing the thumb screws and
fastening the pedestal base to the plate with four 1/4”-20 x 3/8” long flat head screws.
fastening the pedestal base to the plate with four 1/4”-20 x 3/8” long flat head screws.
1904000 Deck Mount
The Cannon Deck Mount plate is a four inch by three inch
clear anodized aluminum plate which allows the hard mounting of
Cannon Dual Axis Rod Holders. The plate comes with a black pro-
tective mounting boot and all mounting hardware.
Cannon Dual Axis Rod Holders. The plate comes with a black pro-
tective mounting boot and all mounting hardware.
Mounting the Pedestal to Your Boat
Mounting Directly to Deck or Gunnel
Carefully choose an ideal position where you may best utilize your pedestal mount. Use the base of the
pedestal as a template to mark hole locations and drill four 9/32" diameter through holes. Fix the pedestal to the
deck or gunnel using four 1/4”-20 flat head screws with four flat washers, lock washers, and nuts
deck or gunnel using four 1/4”-20 flat head screws with four flat washers, lock washers, and nuts
(not included)
. To
determine the length of screw needed, measure the thickness of deck that you are mounting to and add at least
3/4”.
3/4”.
CAUTION:
The Cannon Pedestal
Mount is intended for use
with a Track that is
mounted directly to the
deck of the boat ONLY.
The Cannon Pedestal
Mount is intended for use
with a Track that is
mounted directly to the
deck of the boat ONLY.