ZyXEL Communications VMG5313-B10A/ VMG5313-B30A 사용자 설명서
Chapter 11 Network Address Translation (NAT)
VMG5313-B10A/-B30A Series User’s Guide
184
11.2.1 Add/Edit Port Forwarding
Click Add new rule in the Port Forwarding screen or click the Edit icon next to an existing rule to
open the following screen.
open the following screen.
Figure 75
Port Forwarding: Add/Edit
The following table describes the labels in this screen.
End Port
This is the last external port number that identifies a service.
Translation
Start Port
Start Port
This is the first internal port number that identifies a service.
Translation End
Port
Port
This is the last internal port number that identifies a service.
Protocol
This shows the IP protocol supported by this virtual server, whether it is TCP, UDP, or TCP/
UDP.
UDP.
Modify
Click the Edit icon to edit this rule.
Click the Delete icon to delete an existing rule.
Table 54
Network Setting > NAT > Port Forwarding (continued)
LABEL
DESCRIPTION
Table 55
Port Forwarding: Add/Edit
LABEL
DESCRIPTION
Active
Clear the checkbox to disable the rule. Select the check box to enable it.
Service Name
Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on).
WAN Interface
Select the WAN interface through which the service is forwarded.
You must have already configured a WAN connection with NAT enabled.