Chariot Carriers Chariot Baby Seat 사용자 설명서

Experience has shown that it helps if an overall belt length 
adjustment of more or less 15 to 16 cm is made (measured from 
the point of attachment to the baby seat to the point of attachment 
to the trailer seat).

Now lay both straps that are at the front end of the baby seat 
around the fitted telescopic tube, thread the ends through the
fasteners, as in the top right hand picture, and pull the straps 
through, so that the front edge of the seat is at a distance of about 
10 cm from the telescopic tube.

The next step is to connect the safety belts in the trailer with the baby seat:

Insert the trailer seat crotch 
harness from the rear through 
the slot in the baby seat in front 
of the flap for the padding.

Then insert the fastnex insert 
through the elastic loop at the 
end of the flap for the padding.

For side fitting, the crotch harness of the seat part of the relevant 
side can be used. For centre-fitting, there is an additional crotch 
harness in the centre of the trailer seat.

Please note:
The first production model 
of the Cabriolet incorporated 
the belt system described on 
pages 6 (bottom) and 7 (top). 

If your Cabriolet has this belt 
system, read the section about 
connecting the safety belts with 
the baby seat on 
page 6 (bottom) and page 7 
(top), and then come back to 
the text which follows in this 
section.

Illustration A

First connect the fastex buckles 
on the underside of the baby 
seat with their counterparts on 
the lap belt ends. 
For side-fitting, use the belt 
ends of the lap belt of the side 
in question. 
For fitting in the centre, use the 
central belt ends of both lap 
belts. 

Correct positioning of the baby 
seat.