Chariot Carriers Chariot Baby Seat 사용자 설명서

다운로드
페이지 60
Finally pull all fastening straps tight. (Once you have opened out the trailer body again.)
If you want to adjust the seat to a flatter position, loosen both of the top fastening straps and pull the 
other four straps tight. If you want an adjustment of greater incline, the procedure is the same but reversed.
.2.2 Securing on the CX1 and Cougar1 models
Illustration A
Fully fitted baby seat.
Please note: Make sure you check all belt buckles are tight.
Please note:
Never transport your 
children without the safety 
belts being properly and 
fully adjusted, otherwise 
your child could be 
seriously or even fatally injured 
in the event of an accident!
First connect the fastex buckles 
on the underside of the baby 
seat with their counterparts on 
the lap belt ends. 
Correct positioning of the baby 
seat.
Experience has shown that it 
helps if an overall belt length 
adjustment of more or less 
15 to 16 cm is made 
(measured from the point of 
attachment to the baby seat to 
the point of attachment to the 
trailer seat).
First pull one of the two straps 
at the front end of the baby 
seat through the corresponding 
D-ring.
Fit the second strap in exactly 
the same fashion. Now pull 
both straps tight so that the 
baby seat is positioned cen-
trally.
Thread the end of the strap as 
shown in the above illustration 
through the fastener in the baby 
seat and gently pull the strap 
tight.