ECS NS9400GTC-1GQS-H 사용자 설명서

2. Hardware Installation

2.1. Package Contents

1. VGA Card with NVIDIA Graphics Engine

2. Software and Driver CD

3. Quick Installation Guide

2.2. Hardware Installation

2. Take the case cover off. If there is any homogeneous device, please
remove them (To avoid damage from static electricity, make sure that
you have discharge the static electricity before installation).

1. Shut down your PC and unplug the system power connector.

4. Put on the cas

e cover and connect the monitor cable to the rear

Video output port of the VGA card.

3. Take the VGA card out from the static-proof bag and install it on the
motherboard carefully (Some cards have an additional power cable; if
your card has one, make sure that the cable is connected with the
power supply, or the card may not work properly!).

5. Reboot your PC.

1. Please do not Plug and Play the VGA card cable while you computer
is still running, or you may damage the VGA card components easily.

2. Ensure you insert the VGA card in the correct slot. PCI-Express
cards differ from AGP cards (Please refer to the pictures below!). Make
sure that you locate the correct slot or you could cause damage to your
PC.

Motherboard coul

d possibly come with two PCI-Express slots, please

refer to your motherboard manual for the correct slot location for use
with a single card system.

PCI Express

AGP

The

model name and illustrations used in this User’s Manual are for

reference only, an

d may be slightly different from your card.

4. Cable Adapter