DELL H200 사용자 설명서
CAUTION: Safety Instructions
11
You can also take the following steps to prevent damage from electrostatic discharge:
•
When unpacking a static-sensitive component from its shipping carton, do not remove the
component from the antistatic packing material until you are ready to install the
component. Just before unwrapping the antistatic package, be sure to discharge static
electricity from your body.
component from the antistatic packing material until you are ready to install the
component. Just before unwrapping the antistatic package, be sure to discharge static
electricity from your body.
•
When transporting a sensitive component, first place it in an antistatic container or
packaging.
packaging.
•
Handle all electrostatic sensitive components in a static-safe area. If possible, use antistatic
floor pads and work bench pads.
floor pads and work bench pads.
SAFETY: Battery Disposal
Your system may use a nickel-metal hydride (NiMH), lithium coin-cell, and/or a
lithium-ion battery. The NiMH, lithium coin-cell, and lithium-ion batteries are
long-life batteries, and it is possible that you will never need to replace them.
lithium-ion battery. The NiMH, lithium coin-cell, and lithium-ion batteries are
long-life batteries, and it is possible that you will never need to replace them.
NOTE:
Do not dispose of the battery along with household waste. Contact your local waste
disposal agency for the address of the nearest battery deposit site.
NOTE:
Your system may also include circuit cards or other components that contain
batteries. These batteries too must be disposed of in a battery deposit site. For information
about such batteries, see the documentation for the specific card or component.
about such batteries, see the documentation for the specific card or component.
Taiwan Battery Recycling Mark
PERC H200.book Page 11 Tuesday, July 13, 2010 4:15 PM