StorageTek 9714 사용자 설명서
95698
Eighth Edition
1-7
AUTO CLEAN Feature
■
AUTO CLEAN Feature
Drives might occasionally need to be cleaned to prevent read/write errors. When
your LSM is configured during installation, the AUTO CLEAN feature can be
enabled. If it is and a drive requires cleaning, the robot will receive a software
message telling it to retrieve the cleaning cartridge from the cleaning cartridge cell
in the LSM and place it into the drive.
your LSM is configured during installation, the AUTO CLEAN feature can be
enabled. If it is and a drive requires cleaning, the robot will receive a software
message telling it to retrieve the cleaning cartridge from the cleaning cartridge cell
in the LSM and place it into the drive.
If AUTO CLEAN is not enabled, you must periodically look at the lights on the
drive. When the Use Cleaning Cartridge light is on, you must place a cleaning
cartridge into the drive.
drive. When the Use Cleaning Cartridge light is on, you must place a cleaning
cartridge into the drive.
Refer to
for more information and procedures.