StorageTek 9714 사용자 설명서
Operating in Manual Mode
3-16
Eighth Edition
95698
Mounting a Cartridge into the Drive
CAUTION:
Before you mount a cartridge into the drive, you must make sure that
power is on, and that the Operate Handle indicator is on. On older model
drives, use the shuttle to operate, not the drive handle.
Before you mount a cartridge into the drive, you must make sure that
power is on, and that the Operate Handle indicator is on. On older model
drives, use the shuttle to operate, not the drive handle.
A safety mechanism protects the drive if you try to operate it in an
incorrect state. The shuttle will not operate if this mechanism is
activated. To reset the safety mechanism, wait for the Operate Handle
indicator to turn on. Pull firmly on the shuttle, then push the shuttle in
completely. If the cartridge did not eject, or if the handle did not rise, pull
and push again.
incorrect state. The shuttle will not operate if this mechanism is
activated. To reset the safety mechanism, wait for the Operate Handle
indicator to turn on. Pull firmly on the shuttle, then push the shuttle in
completely. If the cartridge did not eject, or if the handle did not rise, pull
and push again.