Panasonic SC-BTT405 사용자 설명서
21
P
layb
ack
VQT5F60
By using the Bluetooth
®
connection, you can
listen to the sound from the Bluetooth
®
device
wirelessly.
Refer to the owner’s manual of the Bluetooth
Refer to the owner’s manual of the Bluetooth
®
device for details.
≥ If you intend to use an NFC (Near Field
≥ If you intend to use an NFC (Near Field
Communication)-compatible Bluetooth
®
device,
proceed to “One-Touch Connection
(Connecting by NFC)”.
(Connecting by NFC)”.
1
Turn on the Bluetooth
®
feature of the
device.
2
Press [ ].
≥ If “Panasonic BTT” is displayed on the
≥ If “Panasonic BTT” is displayed on the
Bluetooth
®
menu of the device, go to step 4.
3
Press and hold [jPAIRING].
≥ “PAIrInG” will be displayed on the unit’s
≥ “PAIrInG” will be displayed on the unit’s
display and the unit will enter pairing
standby mode.
standby mode.
≥ If another Bluetooth
®
device is already
connected, the connection will be
terminated automatically.
terminated automatically.
4
Select “Panasonic BTT” from the
Bluetooth
Bluetooth
®
menu of the device.
≥ If another Bluetooth
®
device is already
connected, disconnect it.
≥ “ConnECtEd” will be displayed on the unit’s
display and the connection will be
established.
established.
5
Start play on the Bluetooth
®
device.
≥ If prompted for the passkey, input “0000”.
≥ You can register up to 8 devices with this system. If a 9th
device is paired, one of the other registered devices will be
replaced.
≥ This system can only be connected to one device at a time.
≥ When “Bluetooth” is selected as the source, this system
will automatically try and connect to the last connected
Bluetooth
®
device. If the connection attempt fails, try to
establish a connection again.
≥ If you switch the source, the Bluetooth
®
device will be
disconnected.
≥ If the image and sound are out of sync during playback,
restart the playback application you are using. If the
problem persists, connect the Bluetooth
®
device and this
unit with an audio cable.
≥ “Bluetooth Standby Mode” (> 31)
For NFC-compatible Android
TM
devices only
(Android
TM
version 4.1 or higher)
Simply by touching an NFC-compatible
Bluetooth
Bluetooth
®
device on the unit, you can complete
all preparations, from registering a Bluetooth
®
device to establishing a connection.
1
Turn on the NFC feature of the device.
2
Touch and hold your device on the NFC
touch area of this unit. (> 10)
≥ If the unit is in standby, it will turn on, and
touch area of this unit. (> 10)
≥ If the unit is in standby, it will turn on, and
“nFC” will be displayed on the unit’s display.
Keep the device in contact with the unit.
Keep the device in contact with the unit.
≥ When the Bluetooth
®
device is paired and
connected, “ConnECtEd” is displayed on
the unit’s display. Once the registration and
connection of the Bluetooth
the unit’s display. Once the registration and
connection of the Bluetooth
®
device is
complete, move the device away from the
unit.
unit.
≥ If “ConnECtEd” is not displayed, change the
touching position.
3
Start play on the Bluetooth
®
device.
≥ When the connection is established, the playback may
start automatically depending on the type of device being
used.
≥ The One-Touch Connection may not work properly
depending on the type of device being used.
Bluetooth
®
operations
PAIRING
CONNECTED
One-Touch Connection
(Connecting by NFC)
SC-BTT466&465&405P-VQT5F60_mst.book 21 ページ 2014年3月24日 月曜日 午前11時31分