Aussie pmn 사용자 설명서
STEP 4 - Attach Rear Support Bar
13
TOOLS:
•Attach Rear Support Bar on backside of grill legs as shown using four M6 x 35mm Bolts and four 6M
Nuts. Tighten All Bolts.
(ITEM 18)
REAR SUPPORT BRACE
(ITEM 19)
BOLT, M6 X 35
4 pcs
(ITEM 9)
NUT, M6
NUT, M6
4 pcs
STEP 5 - Attach Drip Cup Holder
(ITEM 20)
DRIP CUP HOLDER
(ITEM 21)
BOWL
•Attach Drip Cup Holder : From inside grill Bowl, feed end of Cup Holder through center hole (as
shown below) so that it hangs from bottom of Bowl by the eyelet at top.
shown below) so that it hangs from bottom of Bowl by the eyelet at top.
2 each 6M x 35mm Bolts
Each Side