ONKYO PR-SC5507 사용자 설명서

104

You can assign a default listening mode to each input source that will be selected automatically when you select each 
input source. For example, you can set the default listening mode to be used with Dolby Digital input signals. You can 
select other listening modes during playback, but the mode specified here will be resumed once the AV controller has 
been set to Standby.

Notes:
• If you connect an input component (such as UP-A1 

Dock that seated iPod) to the UNIVERSAL PORT 
jack, you can assign only “Analog” to PORT input 
source.

• This procedure can also be performed on the AV con-

troller by using its [SETUP] button, arrow buttons, 
and [ENTER] button.

Press the [RECEIVER] button followed by 
the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make sure the 
appropriate external input is selected on your TV.

q]/[w] buttons to 

select “5. Listening Mode Preset”, and 
then press [ENTER].
The “Listening Mode Preset” menu appears.

q]/[w] buttons to 

select the input source that you want to 
set, and then press [ENTER].
The signal format selection menu appears.

For TUNER input source only “Analog” will be 
available. For NET/USB input source only “Digi-
tal” will be available.

q]/[w] buttons to 

e]/

r] buttons to select a listening mode.

When you’ve finished, press the [SETUP] 
button.
The setup menu closes.

Analog/PCM: With this setting, you can specify the listening mode to be used when an analog (CD, TV, LD, 

VHS, MD, turntable, radio, cassette, cable, satellite, etc.) or PCM digital (CD, DVD, etc.) audio signal is 
played.

Dolby Digital: With this setting, you can specify the listening mode to be used when a Dolby Digital or Dolby 

Digital Plus format digital audio signal is played (DVD, etc.).

DTS: With this setting, you can specify the listening mode to be used when a DTS or DTS-HD High Resolution 

format digital audio signal is played (DVD, LD, CD, etc.).104

D.F. 2ch: Specifies the default listening mode for 2-channel (2/0) stereo sources in a digital format, such as 

Dolby Digital or DTS.

D.F. Mono: With this setting, you can specify the listening mode to be used when a mono digital audio signal 

is played (DVD, etc.).

Multich PCM: Specifies the default listening mode for multichannel PCM sources input via a HDMI IN, such 

as DVD-Audio.

Dolby TrueHD: Specifies the default listening mode for Dolby TrueHD sources, such as Blu-ray or HD DVD 

(input via HDMI).

DTS-HD Master Audio: Specifies the default listening mode for DTS-HD Master Audio sources, such as Blu-

ray or HD DVD (input via HDMI).

DSD: Specifies the default listening mode for DSD multichannel sources, such as Super Audio CD.

Only listening modes that can be used with each input signal format can be selected (see pages 76 to 82).
The Last Valid option means that the listening mode selected last will be used.