Hobart HCR40 사용자 설명서
– 7 –
OPERATION
WARNING: THE RANGE AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, SERVICING AND
CLEANING THE RANGE.
CLEANING THE RANGE.
BEFORE FIRST USE
Clean off the rust preventive compound on the surface units with a cloth dampened with a grease solvent. Wipe
with a clean, damp cloth, then dry thoroughly.
with a clean, damp cloth, then dry thoroughly.
Seasoning
The cast iron surface plates must be seasoned. To do this, grease the top, then turn the element switches to
LO (or thermostat to 300
LO (or thermostat to 300
°
F) and allow the plates to heat up gradually for about 2 hours. Repeat this procedure
a second time before regular use. Seasoning the surface plates will deter cracking of the cast iron and ensure
a longer life.
a longer life.
TOP SURFACE ELEMENTS AND CONTROLS (Fig. 1)
CAUTION: Do not continuously operate surface units at maximum temperature; this is for occasional
use only. This practice contributes not only to costly operation and waste of energy, but also to rapid
deterioration of the heating elements and castings.
use only. This practice contributes not only to costly operation and waste of energy, but also to rapid
deterioration of the heating elements and castings.
Element Switches — control and maintain heat to surface elements.
Element Indicator Lights — when lit, indicates power is being supplied to the element.
There are 3 different types of plates that may be used in the HCR Series Ranges.
USED IN
TEMP.
PLATE & SIZE
MODELS
CONTROLS
RANGE
Hot Top
HCR40, HCR41,
Thermostat provides control of a single
340 to 800
°
F
12" X 24"
HCR44, HCR46,
element rated at 5 KW. Indicator light
HCR47, HCR50,
(next to thermostat) is ON when thermostat
HCR56, HCR401,
calls for heat and goes OFF when
HCR411, HCR561
desired temperature is reached.
9
1
/
2
" Dia. French
HCR41, HCR43,
Infinite switch (3-heat switch in 480 V.
Hot Plates
HCR45, HCR47,
models) provides (according to its setting)
*
(or Optional
HCR49, HCR51,
a varying percent (about 7-100%) of its total
Hi-Speed
HCR58, HCR411,
input to the elements. Rated at 2 KW.
Elements)
HCR431, HCR441
9
1
/
2
" Dia.
HCR56, HCR561
Infinite switch provides (according to its
Hi-Speed
setting) a varying percent (about 7-100%) of
Elements
its total input to the elements. Rated at 2 KW.
Griddle Top 36"
HCR42, HCR48,
(3) thermostats, each with its own indicator
175-550
°
F
HCR421
cycling light.
Griddle Top 24"
HCR58, HCR441
(2) thermostats with individual indicator lights.
175-550
°
F
*
The 9
1
/
2
" diameter French hot plates are energy saving units. A separate thermostat is built into each plate.
When a plate's dial is set at the top range of the infinite switch and a pan or pot containing food is placed on the
plate, the plate delivers 2,000 watts at a temperature lower than 800
plate, the plate delivers 2,000 watts at a temperature lower than 800
°
F. When the cooking utensil is removed
or boils dry, heat is no longer carried from the unit and the temperature rises. When the plate reaches from 820
°
F
to 850
°
F, wattage is cut back to 950 watts, a 52.5% reduction.