Maytag DN5000 사용자 설명서

 

52 of 90 

 

Display reads vending but the elevator does not

move.

Check port door

switch.

Open and close

the port door.

Does the port

 door close completely?

YES

Clear the

obstruction and

retest with service

door open.

NO

Is port door switch

properly secured?

Correct or replace

port frame and

retest.

Does elevator

function?

1

NO

Finished.

YES

Check harness
connection and

VMC.

Is harness

connected at VMC

YES

Replace port

door switch.

Connect

harness and

retest.

YES

NO

1

Open glass door

and depress the

P.I. Switch and

test vend one

selection.

Did elevator motor

run?

Close the door

and retest.

Did the elevator

motor move?

YES

Finished.

YES

Did the elevator

make any noise?

NO

Did the elevator

belt try to run

backwards?

YES

Check the home sensor

switch connections.

YES

Check for obstructions

under the conveyor and

retest.

Replace elevator

motor harness and

retest.

NO

Does the elevator

run?

Finished.

Replace P.I.

switch and retest.

NO

Replace elelvator

motor and retest.

NO

Did elevator motor

run?

YES

Replace lower

limit switch

harness.

Did elevator run?

Finished.

YES

Replace VMC

and retest.

NO