LivinBox Storage Products Co. 18 사용자 설명서

(on some models)

12

(1) The automatic icemaker fills the

(2) ice storage bin.

(3) Pushing on the ice cradle activates the

(4) motor-powered auger which moves the ice 

cubes into glass through the

(5) chute.

When the selector switch is moved to CRUSHED 
ICE, a flipper directs the cubes through the

(6) crusher and crushed ice falls through the chute.

(7) spill shelf.

1

2

3

7

5

6

4

If your refrigerator is operated before the water
connection is made, remove the ice storage bin
and make sure the icemaker feeler arm is in the
STOP (up) position.

When the refrigerator has been connected 
to the water supply, move the feeler arm to the
ON (down) position.

The icemaker will fill with water when it cools to
freezing. A newly-installed refrigerator may take 
8 to 12 hours to begin making ice cubes.

When the water supply has been 
connected to the icemaker, remove the
ice storage bin, move the icemaker feeler
arm to the ON (down) position, and
replace the bin.

To remove the ice storage bin, lift the
front of the bin and pull the bin straight
out while supporting it at front and rear.

To replace the ice storage bin: Slide it 
back on the ice bin shelf. If the bin does 
not go all the way back, remove it and rotate
the drive mechanism 1/4 turn. Then push the
bin back again.

Rotate

Drive

Mechanism

A newly-installed refrigerator may take
8 to 12 hours to begin making ice.