Maytag 61005299 사용자 설명서

• temperature control turned to “Off” or 0
• power cord not plugged in
• no power at the electrical outlet
• circuit breaker tripped or the house fuse blown
• refrigerator is in automatic defrost

• modern refrigerators are larger and run colder, which requires more running time to 

provide more stable temperatures

• prolonged door openings
• base grille blocked
• too many door openings
• door not sealing (due to a package or a container holding door open)

• cabinet not level
• weak floor

• odor producing foods should be covered or wrapped
• interior needs cleaning

• normal air flow for condenser circulation

• cabinet not level
• weak floor

• hot, humid weather
• frequent or prolonged door openings
• door not closed properly

• food not wrapped properly
• hot, humid weather

• packages not wrapped or sealed properly
• crisper not tightly closed
• temperature control set too cold

• bulb burned out
• no power at the outlet

• refrigerator control set too warm
• prolonged door openings

• refrigerator control set too cold

• freezer control set too warm
• prolonged door openings

• a normal sound caused by defrost water dripping on defrost mechanism

• appearance of a red glow or reflection is normal during the defrost cycle

• products with high sugar content may not harden completely when frozen (ice 

cream, concentrated juice, etc.)

• adjust freezer control to a colder setting

• trays may be coated with residue film from minerals in the water. Wipe trays with 

vinegar-soaked cloth until clean. If residue is heavy, clean trays each time 
the refrigerator is cleaned.

• cold air moving over the ice cubes causes shrinkage, especially with limited usage. 

This is normal.

• stop arm in OFF (up) position
• water supply turned off
• water pressure too low
• freezer too warm

• special design to limit condensation during periods of high humidity