GE ZIF36N LH 사용자 설명서
22
Right hand door swing models are illustrated in these
instructions. Follow these instructions for left hand
models.
instructions. Follow these instructions for left hand
models.
Tools and materials
required:
• #2 Phillips screwdriver
• Drill and appropriate
required:
• #2 Phillips screwdriver
• Drill and appropriate
bits
• Custom door panels
• Putty knife
• Safety glasses
• 7/16
• Putty knife
• Safety glasses
• 7/16
″ wrench
Parts List
A. Top trim
B. Handle side trim
C. Hinge side trim
D Bottom trim
E. Support bracket for
A. Top trim
B. Handle side trim
C. Hinge side trim
D Bottom trim
E. Support bracket for
custom panel
F. 4-3/8
″ screws for
support brackets
(20)
(20)
G. Grille support
panel and screws
(6)
(6)
H. Wood screws #6
1/2
″ flat head
screws (30)
NOTE: If you are using a custom handle, see ZKHTR1
installation instructions. For a tubular stainless steel
handle, see ZKHTRSS1 installation instructions.
installation instructions. For a tubular stainless steel
handle, see ZKHTRSS1 installation instructions.
Kit Contents
This kit provides for the installation of 3/4
″ thick
custom door and grille panels. Handles are included
and must replace the supplied handles.
and must replace the supplied handles.
Step 1
Remove
handles
and trim
Remove
handles
and trim
• Open door to 90°.
• Remove the Phillips head screws from the full
• Remove the Phillips head screws from the full
length handle, remove and discard handle.
Retain screws.
Retain screws.
• Open the door fully to stop.
NOTE: Removal of actuator arm allows the door to
be opened wider, giving greater access to hinge
side trim.
be opened wider, giving greater access to hinge
side trim.
• Remove the screws from the aluminum trim, top
bottom and hinge side.
• Retain screws. Discard original trim and handle.
A
B
C
D
E
F
G
H
ZKTR36LH/ZKTR36RH Trim Kit
3/4
″ Custom Panels