KitchenAid KBRS36FMB00 사용자 설명서

다운로드
페이지 52
7
Max Cool
The Max Cool feature assists with periods of heavy ice usage, full 
grocery loads, or temporarily warm room temperatures. 
Press MAX COOL to turn on the Max Cool feature. The Max 
Cool indicator light will remain on for 24 hours unless 
manually turned off.
NOTE: 
The temperature display will not change. After 24 hours, 
the refrigerator returns to the previous temperature set points. 
Over Temperature Reset
The Over Temperature feature is designed to let you know when 
either the refrigerator temperature rises above 48°F (9°C) or the 
freezer temperature rises above 15°F (-9°C) for longer than 
1
¹⁄₂ hours. The audio alarm will shut off automatically when the 
temperature returns to normal, but the indicator light will continue 
to flash to let you know that an over temperature condition has 
occurred. 
IMPORTANT: 
If the Over Temperature Alarm activates, your food 
may spoil. See the “Power Interruptions” section for more 
information and minimize door openings until temperatures return 
to normal.
Press OVER TEMPERATURE RESET to turn off the audio 
alarm and flashing indicator light. 
The Over Temperature feature will continue to activate every 
1
¹⁄₂ hours until refrigerator and freezer temperatures are 
below 48°F (9°C) and 15°F (-9°C), respectively.
Holiday Mode 
The Holiday Mode feature is designed for the traveler who wishes 
to save additional energy or for those whose religious 
observances require turning off the lights and ice maker. By 
selecting this feature, the temperature set points remain 
unchanged, the ice maker will be disabled and the interior lights 
will turn off. 
Press HOLIDAY MODE to turn on the Holiday Mode feature. 
This feature will remain on until the Holiday Mode key is 
pressed again. 
NOTE:
 If the Max Cool feature has been selected prior to 
turning on the Holiday Mode feature, then the set points will 
remain at 32°F (0°C) and -10°F (-23°C) for the refrigerator and 
freezer compartments until the Max Cool feature times out. 
The refrigerator will then return to the previous temperature 
set points.
Call Service 
If the Call Service indicator light is flashing, call for service. See 
the “Assistance or Service” section for information on calling for 
service. 
Door Open
The Door Open indicator light will flash, an alarm will sound and 
the interior lights will turn off when a door is open for longer than 
10 minutes. When the door is closed, the sound alarm will reset 
and turn off but the Door Open indicator light will continue to 
flash until the temperature is equal to or below 45°F (7°C) and 
15°F (-9°C) for the refrigerator and freezer compartments 
respectively. You can also reset the Door Open sound alarm by 
pressing the OVER TEMPERATURE RESET. 
REFRIGERATOR 
FEATURES
Water Filtration System
The Base Grille Water Filter Status Light 
The water filter indicator display or light will help you know when 
to change your water filter cartridge. The display or light is 
located at the top of the refrigerator compartment. 
NOTE: Do not use with water that is microbiologically unsafe 
or of unknown quality without adequate disinfection before 
or after the system.
A new water filter should display a reading of 99% and will 
continue to decrease as the filter life is used. When display reads 
10%, it is time to order a replacement filter. It is recommended 
that you replace the base grille water filter cartridge when the 
water filter indicator light changes to 0% OR when water flow to 
your water dispenser or ice maker decreases noticeably. (See 
“Changing the Base Grille Filter” later in this section.)
After changing the water filter cartridge, reset the water filter 
status light by pressing and holding the RESET for 2 seconds. 
The indicator light will change to 99% when the filter indicator is 
reset.
Changing the Base Grille Filter
1.
Locate the water filter cartridge cap in the front base grille. 
Rotate the cap counterclockwise to a vertical position and 
pull the cap and filter cartridge out through the base grille.
NOTE:
 There will be water in the cartridge. Some spilling may 
occur. 
2.
Remove the cartridge cap by sliding it off the end of the old 
cartridge. The cap will slide to the left or right. DO NOT 
DISCARD THE CAP.