Jenn-Air W10379134A 사용자 설명서

NOTES: 

■

Dashed lines represent backer panel placement.

■

Illustration shows backer panels placed on decorative 
overlays.

The dispenser frame attaches to the panel with 4 screws. 

The dispenser frame overlaps the dispenser cutout by 

⁵⁄₁₆" 

(0.78 cm) on each side and 

¹⁄₂" (1.27 cm) on the top and bottom.

Custom side panels may be needed when not enough space is 
available to have cabinets on both sides of the refrigerator or 
when the refrigerator is placed at the end of a cabinet run. You 
may choose an Inset, Flush, or Recessed Inset panel installation.

The width and height of a side panel are determined by the type of 
installation you are planning. 
NOTES: 

■

The dimensions shown are actual product dimensions and 
may not reflect the needed panel installation dimensions.

■

The side panel should be a minimum of ½" (1.27 cm) thick 
to avoid warping.

■

If the opening depth is 25" (63.5 cm) or more, you may 
want to install a support board on rear wall.

16

³/₄" (42.55 cm) 22³/₄" (57.79 cm) 39³/₄" (100.97 cm)

19

¹/₄" (48.90 cm) 26¹/₄" (66.68 cm) 45³/₄" (116.21 cm)

¹⁄₂

A

B

C

A

A