Wells WV-4HS 사용자 설명서
CLEANING INSTRUCTIONS (continued)
19
504
p/n
3039
03
o
p
M
W
V
-4H V
entle
ss Ho
tpla
te Coo
k
top
CAUTION:
ELECTRIC
SHOCK HAZARD
SHOCK HAZARD
Disconnect appliance from
electric power before
cleaning.
CAUTION:
HOT SURFACE
Exposed surfaces
can be hot to the touch
and may cause burns. Allow
appliance to cool before
cleaning.
can be hot to the touch
and may cause burns. Allow
appliance to cool before
cleaning.
IMPORTANT:
Never allow PRE-FILTER or
FILTER PACK to get wet.
DO NOT wash either of these
two filters. Washing these
filters will ruin them and cause
the appliance to shut-down.
FILTER PACK to get wet.
DO NOT wash either of these
two filters. Washing these
filters will ruin them and cause
the appliance to shut-down.
IMPORTANT:
DO NOT spill or pour water
into controls, control panel,
wiring or coil-type hotplate
elements. Damage to internal
components will occur.
Damage to internal
components from water
damage is not covered by
warranty.
into controls, control panel,
wiring or coil-type hotplate
elements. Damage to internal
components will occur.
Damage to internal
components from water
damage is not covered by
warranty.
IMPORTANT:
DO NOT use steel wool or
metal implements to clean
cabinet surfaces.
metal implements to clean
cabinet surfaces.
VENTILATOR MONTHLY CLEANING
PREPARATION:
Disconnect appliance from electric power
Allow
to
cool
before
cleaning
FREQUENCY:
Monthly
TOOLS: Warm water and a mild detergent
Soft
clean
cloth
or
sponge
Plastic
scouring
pad,
plastic
scraper
Container
for
disposal
of
grease
EXTERIOR
Wash exterior surfaces with a soft clean cloth or sponge dampened
with warm water, mild soap or detergent. Rinse with a soft clean
cloth or sponge dampened with warm water. Allow to air dry.
INTERIOR:
In addition to the weekly cleaning procedure, remove the filter
pack.
Cover the griddle section. Wash the interior surfaces of the
ventilator with warm water, mild soap or detergent and a clean,
soft cloth or sponge. Stubborn or burned-on food debris bay be
removed with a plastic scouring pad or plastic scraper.
Dry thoroughly with a clean soft cloth.
Uncover the griddle and reassemble the ventilator.
Procedure is complete.