Vermont Casting VC200 사용자 설명서
Lighting the Side Burner (Optional to Models VC100 & VC200)
Fig. 13
O
F
F
HI
LO
IGNITOR
VALVE CONTROL
Page 12
WARNING : Never stand with your head directly over the Grill when preparing to light the side burner, to
prevent possible bodily injury.
prevent possible bodily injury.
1. Turn the side burner control knob to HI (see Fig. 13).
2. Turn the Igniter Knob clockwise until the burner ignites. The burner
should light within four clicks of the igniter.
should light within four clicks of the igniter.
NOTE: Observe the flame pattern. Soft blue flames are normal ; hard blue
flames or wavy yellow flames are not. You can adjust the flame with the air
shutter below the control knob (see Fig 19). If yellow flames persist, refer to
the Troubleshooting Guide on Page 26.
flames or wavy yellow flames are not. You can adjust the flame with the air
shutter below the control knob (see Fig 19). If yellow flames persist, refer to
the Troubleshooting Guide on Page 26.
Shutting the burner off
1. Turn the control knob counterclockwise to the HI position, then depress it and turn it to OFF. NEVER force
the knob without depressing it, as that can damage the valve.
1. Turn the control knob counterclockwise to the HI position, then depress it and turn it to OFF. NEVER force
the knob without depressing it, as that can damage the valve.
Operation