Vermont Casting CF9080 사용자 설명서

Fig. 12

Page 10

The Rotisserie burner is intended to be used for rotisserie cooking only.

WARNING : Never use the main burners while using the Rotisserie burner, as that could result in igniting the
drippings, or overheating your Grill.

The Rotisserie assembly includes a
counter-weight for large or irregular
food items ; using the counterweight
will reduce the strain on the motor.

1. Remove the warming rack. Lay a flat
    pan directly on the cooking grates to
    catch drippings. Large food items
    may require that you remove the
    cooking grates and place the pan on
    the sear plates.

2. Insert the ends of the Rotisserie
    Support into the slots of the right
    cooking grate, so that the edge of the
    support is approximently 1” from
    the right casting, and the top groove
    is in line with the rotisserie spit hole in the left casting (see Fig. 12).

3. Engage the Motor Bracket into the Bracket guide on the inside edge of the left shelf.

4. Engage the Rotisserie Motor in the Motor Bracket (see Fig. 12).

5. Assemble the spit and meat forks. Adjust the retainer bushing to keep the spit in place (see Fig. 12).
    Tighten the thumbscrews with small pliers.

     Always use the counterweight to balance the spit when cooking large or irregular food items.

     The Rotisserie Motor is rated to turn a maximum load of 12 lbs.

                                                     WARNINGS :

Never use the Rotisserie Motor in the rain, and never use it if it has become wet.

• Always use a grounded three-prong outlet and a three-prong extension cord to energize the Rotisserie
Motor. Never alter or remove the grounding prong on the Rotisserie Power Cord, as an electric shock hazard
would then result.

Never permit an electrical supply cord or a gas supply line to contact any heated surface of this Grill.

Rotisserie
Motor

Rotisserie
Bracket

Rotisserie
Forks

Rotisserie
Support

Bushing