Smeg SUK61MPX5 사용자 설명서

Turn the function selector to the 

 symbol to start the pyrolysis cycle. After the orange light of the

thermostat has lit up and a few minutes have elapsed, the red «door-block» light also comes on to
indicate that the door of the appliance has been blocked owing to the high temperature inside the oven.
When the function selector moves to 

 the display will show the 

 symbol: this means that the

pyrolysis cycle will start immediately and will last one and a half hours. It is possible to prolong the
duration of the pyrolysis up to a maximum of 3 hours. To do so, after the cycle has started press the 
key and within a few seconds key in the variation of value 

 or 

. A few seconds after the last keying,

the display will show the letter P followed by the duration of the pyrolysis which has just been
programmed, and A will stop flashing.
After the pyrolysis has started and after having made any changes to the duration as described above, it
is also possible to programme the finishing time of the cleaning cycle.
Press the 

 key. On the display, A will begin to flash and the total of the current time and the duration of

the pyrolysis cycle will be displayed. (Example: Current time: 12.10 - Programmed duration: 2.00 - Time
shown: 14.10). Now use the keys to change the 

 or 

 values to programme the time of the end of the

cleaning cycle. A few seconds after the last keying, the display will show the current time and the orange
light will go out and then come back on at the pre-selected time.