Maytag MMV1164WS 사용자 설명서

다운로드
페이지 6
3
Electrical Requirements
Observe all governing codes and ordinances.
Required:
A 120 Volt, 60 Hz, AC only, 15- or 20-amp electrical supply 
with a fuse or circuit breaker.
Recommended:
A time-delay fuse or time-delay circuit breaker.
A separate circuit serving only this microwave oven.
Settings
Clock
12-hour (12:00-11:59). 
To Set Clock:
1. Touch CLOCK.
2. Enter time.
3. Touch CLOCK or the Start control.
Scroll Speed
To Adjust Speed:
1. Touch and hold CLOCK for 3 seconds until 2 tones sound.
2. Touch number pad “1” for SLOW, “2” for NORMAL or “3” for 
FAST.
3. Then touch the Start control to set speed.
Timer (on some models)
Timer can be used independently during any cooking program. 
To Set Timer:
1. Touch the Timer control.
2. Enter time.
3. Touch the Timer control or the Start control.
Vent Fan
High, low and off. Comes on automatically as cooling fan during 
any cook function.
Control Lock
Activate to avoid unintended start. Touch and hold the Cancel 
control for about 3 seconds until 2 tones sound and padlock icon 
appears in the display. Repeat to unlock control.
Tones
Programming tones and signals. Touch and hold number pad “1” 
for about 3 seconds to turn off programming tones. Repeat to turn 
back on. Touch and hold number pad “2” for 3 seconds to turn off 
all tones. Repeat to turn back on.
Demo Mode
Activate to practice using the control without actually turning on 
the magnetron. Touch and hold number pad “3” for 3 seconds. The 
“DEMO” icon will appear in the display. Repeat to exit Demo Mode.
Features
Cooking Rack
Use only for 2-level cooking. To avoid damage to the microwave 
oven, always remove rack after 2-level cooking. To avoid damage 
to the microwave oven due to soil buildup, clean rack supports 
often.
Turntable
Turntable may be turned off (on some models) for manual cooking 
only. This is helpful when cooking with plates that are bigger than 
the turntable, or when cooking with plates that are side by side. 
Turntable cannot be turned off during preset or sensor (on some 
models) functions.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, 
fire, or electrical shock.
WARNING
GROUNDING INSTRUCTIONS
SAVE THESE  INSTRUCTIONS
■  
For all cord connected appliances:
The microwave oven must be grounded. In the event of 
an electrical short circuit, grounding reduces the risk of 
electric shock by providing an escape wire for the electric 
current. The microwave oven is equipped with a cord 
having a grounding wire with a grounding plug. The plug 
must be plugged into an outlet that is properly installed 
and grounded.
WARNING: 
Improper use of the grounding plug can 
result in a risk of electric shock. Consult a qualified 
electrician or serviceman if the grounding instructions are 
not completely understood, or if doubt exists as to whether 
the microwave oven is properly grounded. 
Do not use an extension cord. If the power supply cord is 
too short, have a qualified electrician or serviceman install 
an outlet near the microwave oven.
This device complies with Part 18 of the FCC Rules.