Maytag W10669242B 사용자 설명서
10
Stainless Steel (on some models)
NOTE: To avoid damage to stainless steel surfaces, do not use
soap-filled scouring pads, abrasive cleaners, steel-wool pads,
gritty washcloths, or abrasive paper towels. Damage may occur to
stainless steel surfaces, even with one-time or limited use.
Cleaning Method:
Rub in direction of grain to avoid damaging.
Cleaning Method:
Rub in direction of grain to avoid damaging.
■
affresh
®
Stainless Steel Cleaner Part Number W10355016:
See the “Accessories” section for more information.
Metallic Paint (on some models)
Do not use abrasive cleaners, cleaners with bleach, rust
removers, ammonia, or sodium hydroxide (lye) because
paint surface may stain.
Control Panel and Oven Door Exterior
To avoid damage to the control panel, do not use abrasive
cleaners, steel-wool pads, gritty washcloths, or abrasive
paper towels.
Cleaning Method:
■
Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly
on panel.
■
affresh
®
Kitchen and Appliance Cleaner Part Number
W10355010 (not included): See the “Accessories”
section for more information.
Oven Racks
Cleaning Method:
■
Steel-wool pad
■
For racks that have discolored and are harder to slide, a light
coating of vegetable oil applied to the rack guides will help
them slide.
Oven Cavity
Do not use oven cleaners.
Food spills should be cleaned after the oven cools. At high
Food spills should be cleaned after the oven cools. At high
temperatures, foods react with porcelain, and staining, etching,
pitting, or faint white spots can result.
Cleaning Method:
Cleaning Method:
■
Self-Cleaning cycle: See “Self-Cleaning Cycle” first.
Oven Lights
The oven light(s) are standard 25-watt appliance bulbs.
Before replacing, make sure the oven is cool and the
controls are turned off.
To Replace:
1. Disconnect power.
2. Turn the glass bulb cover in the back of the oven
To Replace:
1. Disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, and then bulb cover by turning clockwise.
5. Reconnect power.
4. Replace bulb, and then bulb cover by turning clockwise.
5. Reconnect power.