Sears 790.428 사용자 설명서

ENGLISH

Setting Cooktop Controls

Locking the Controls

The Induction Cooktop may be locked in order to prevent the cooktop from accidentally being turned ON.

To Turn ON the Controls Lock Feature:

The Cooktop Lock will not activate until the cooktop is OFF. If the cooktop power is not OFF, touch and hold the

key pad until a beep sounds (about 1 second). The Power Indicator light located above the

key pad will turn

OFF.

Touch the

key pad until a beep sounds (about 5 seconds). The Lock Indicator Light above the

key pad will

turn ON indicating the cooktop is locked. This will keep any Cooking Zone or Cooktop functions from being accidentally
turned ON (See Fig. 5)

To Turn OFF the Controls Lock Feature:

Touch the

key pad until a beep sounds (about 5 seconds). The Lock Indicator Light above the

key pad will

turn OFF indicating the cooktop is unlocked. The Cooking Zones or any of the other Cooktop functions may now be
used (See Fig. 4).

If the cooktop is needed you must touch and hold the

key pad until a beep sounds (about 1 second). The Power

Indicator Light located above the

key pad will turn ON. (See Fig. 7). You may now activate any of the Cooking

Zones.

Minute Timer

The Minute Timer feature may be useful in the kitchen if a recipe calls for keeping track of time. This feature will keep track
of time from 1 to 99 minutes. The LED display located to the left of the Timer UP/DOWN arrow key pads will begin to count
down minutes once set.

To Set the Minute Timer:

Touch the

listed under the word “TIMER”. Touching and releasing the

or the

key pads will increase

or decrease the Minute Timer setting by 1 minute with each key press (up to

minutes).

Once the Timer LED displays the desired amount of time, release the UP or DOWN Arrow key pads. The Minute Timer
LED will flash the time with a small dot to the right. Once the LED quits flashing and the dot disappears the
MinuteTimer will begin the countdown with remaining minutes. Once the Minute Timer reaches

a long beep will

sound indicating that the time is up.

To Cancel the Minute Timer:

Touch the

and

key pads at the same time or touch and hold either the

key pad and

scroll to

If cancelling the Minute Timer using the scrolling method, once the Main Control LED reaches

, release the Arrow

key pad.

The LED will flash momentarily and then quit flashing. The set time will disappear from the LED indicating that the
MinuteTimer is no longer active.