Smeg FS60XNG 사용자 설명서

다운로드
페이지 36
 
Instructions for the user
 
 
 
24 
9.3  Use of the gas oven 
 
   
 
 
9.3.1  Electronic spark lighting 
  
 
 
  Open the oven door completely, press the 
thermostat  knob  and  turn  it  clockwise  to  max. 
temperature. The electronic spark lighting device will 
be  enabled  automatically. Once the oven is  lit, hold 
the  knob  down  for  a  few  seconds  to  allow  the 
thermocouple to heat up. 
This device should not be enabled for more than 15 
seconds;  if  after  this  time  the  burner  has  not  come 
on, stop, fully open the oven door and try again after 
one minute. 
 
  
 
 
 
9.3.2  Manual lighting 
  
 
 
  Open the oven door completely and turn the 
thermostat knob. Place a lit match to the mouth of 
the flame pipe A in the centre of the oven floor and 
press  the  thermostat  knob.  Once  the  oven  is  lit, 
hold the knob down for a few seconds to allow the 
thermocouple to heat up and check that the oven is 
lit  through  the  inspection  hole  B.  Choose  the 
cooking temperature by turning the knob clockwise 
to  the  desired  temperature,  between  50°  and 
275°C. 
 
  
 
If the burner is accidentally switched off, turn the knob to the off position 
 
(
) and wait for one minute before lighting again. 
 
  
 
9.4  Use of the electric grill 
 
  
 
9.4.1  Using the grill in cookers with electric oven 
  
 
 
  For short cooking procedures, such as  the final crisping of meat which is 
already cooked, select the static grill function 
 and turn the thermostat 
knob to the maximum temperature. The fan grill function (certain models 
only) allows actual cooking procedures to be carried out, thanks to the fan 
function  which  ensures  that  the  heat  penetrates  into  the  food.  For  this 
cooking  mode,  select  the  fan  grill  function 
  and  turn  the  thermostat 
knob to the ideal cooking temperature (never set at more than 200° C).