Echo SRM-225 사용자 설명서

© 2/2014 ECHO Inc.

X7722271109

Note: For normal use, Speed Feed® head disassembly is not 

necessary.  However, if circumstances require 
disassembly, follow these instructions.

1. Press top of locking tabs (A) on both sides of Speed 

Feed® head to release cover (B) from eyelet carrier(C). 

2. Remove cover from eyelet carrier.  

•

•

1. Cut one piece of line to recommended length.



.080 (2.0 mm) dia. – 20’ (6 m)



.095 (2.4 mm) dia. – 20’ (6 m)

2. Align arrows on top of knob with openings in eyelets.

3. Insert one end of trimmer line into an eyelet, and push line 

equal distance through trimmer head.

4. Hold trimmer head while turning knob clockwise to wind line 

onto spool until about 5” (13 cm) of each line remains 
exposed.

A

B

C

For more information
scan this QR code.