Fujitsu CM25-00322-1E 사용자 설명서
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
205
CHAPTER 4 MENUS
4.5.5.6
Section Disposition/Connection Specifying
This section explains how to set the section allocation/link option (linker option).
■ Section disposition/connection specifying
1. Click the [Linker] tab from the project setup dialog box.
2. Select the [Disposition/Connection] category.
The disposition/connection setup dialog box shown in Figure 4.5-32 opens.
3. Select [Auto Disposition] from the drop-down list.
(None/Mode 1/Mode 2)
The subsequent setting depends on how the section is concretely allocated.
Figure 4.5-32 Disposition/Connection Setup Dialog Box
■ When a section is allocated to the specified ROM/RAM area
1. Define the ROM/RAM area.
See Defining the ROM/RAM area.
2. Select the ROM/RAM area you want to set from [ROM/RAM Area List].
3. Click the [Set Section...] button.
The section setup dialog box shown in Figure 4.5-32 opens.