Elektra Beckum PK 255 사용자 설명서

2.14

 PK 255

A

Danger! 
Before carrying out any fault service or main-
tenance work always: 

-

Switch machine OFF.

-

Unplug power cable. 

-

Wait for saw blade to come to standstill. 

Check that all safety devices are operational again
after each fault service.

Undervoltage relay 
tripped by power failure. 

Switch on again.

No supply voltage.

Check cables, plug, out-
let and mains fuse.

Motor overheated, e.g. 
by 

-

a dull saw blade 

-

too high a feed rate

-

sawdust build-up in
housing.

Eliminate cause for 
overheating, wait for a 
few minutes, then start 
saw again. 

No supply voltage.

Interchange phases 
(see „Assembly and 
connection“

Saw blade dull (possibly 
tempering marks on 
blade body).

Replace saw blade (see 
section „Maintenance“).