Festool PD571579 사용자 설명서

12

Compatible StickFix sanding discs are quick and 
easy to attach to the StickFix sanding pad. Simply 
press the self-adhesive sanding discs [1-7] onto 
the sanding pad [5-2]. The adhesive coating holds 
the StickFix sanding pad securely in position. Make 
sure that the sanding disc holes line up with the 
suction holes [6-3]. Tear off the sanding disc when 
worn.

6-1

6-2

6-3

You can switch between internal and external 
extraction depending on the size of the particles 
produced by the sanding process.

Push the switch [6-1] to change between the 

 

f

two dust extraction modes.

You can adjust the suction power to match the 
surface type, but only when internal extraction 
is active (see chapter “Adjusting the internal/
external extraction).

Use the adjusting wheel [1-5] to adjust the 

 

f

suction power.

1: Low suction power

6: High suction power

Start with a low suction power (position 1) and 

 

f

slowly increase until you can feel that the ap-
plication pressure has noticeably changed.
A high suction power makes sanding work on 

 

L

ceilings and walls less tiring.
Excessive suction power can cause the ma-

 

L

chine to vibrate and become more diffi cult to 
guide. The machine may also be overloaded. 
This activates the protective circuit. The red 
diode flashes slowly. The electronic circuit 
switches to recovery speed. If this happens, 
you must stop working immediately until the 
machine has cooled down again.

External extrac-
tion [6-2]
(between sanding 
disc and brush 
ring)

Extracting 
larger particles 
such as carpet 
residue

Internal extraction 
[6-3]
(suction hole) 

Extracting small 
particles such as 
fi ller with maxi-
mum suction ef-
fect