Husqvarna 325P5X 사용자 설명서

다운로드
페이지 32
English
 – 19
STARTING AND STOPPING
Starting
Hold the body of the machine on the ground using your left 
hand (CAUTION! Not with your foot!). Grip the starter handle, 
slowly pull out the cord with your right hand until you feel 
some resistance (the starter pawls grip), now quickly and 
powerfully pull the cord. Never twist the starter cord around 
your hand.
Repeat pulling the cord until the engine starts. When the 
engine starts. return choke control to run position and apply 
full throttle; the throttle will automatically disengage from the 
start setting.
CAUTION!  Do not pull the starter cord all the way out and do 
not let go of the starter handle when the cord is fully extended. 
This can damage the machine.
CAUTION!  Do not put any part of your body in marked area. 
Contact can result in burns to the skin, or electrical shock if 
the spark plug cap has been damaged. Always use gloves. 
Do not use a machine with damaged spark plug cap.
Stopping
The engine is stopped by moving the stop switch to the stop 
position.
CAUTION!  The stop switch automatically returns to the start 
position. In order to prevent unintentional starting, the spark 
plug cap must be removed from the spark plug when 
assembling, checking and/or performing maintenance. 
!
WARNING! When the engine is started with 
the choke in either the choke or start throttle 
positions the cutting attachment will start to 
rotate immediately.