Grizzly G1014Z 사용자 설명서

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#BL10589 PRINTED IN TAIWAN

What Changed?

We have added a sleeve guard to the sander to
help reduce the risk of entanglement. The sleeve
guard MUST be installed on the idler roller guard
using the lock knobs and flat washers, as shown
in

Figure 1.

Install the idler roller guard and sleeve guard onto
the idler roller after belt tension and tracking are
properly set, as described on G1014Z Manual

Pages 12 & 13.

This update covers changes made to the machine after the owner's manual was printed. All page num-
ber references refer to the owner's manual for this machine. Keep this update with your owner's man-
ual for future reference. If you have questions, contact Tech Support at (570) 546-9663 or by email at
techsupport@grizzly.com.

MODEL G1014Z/G1014ZX

COMBINATION SANDER

MANUAL UPDATE

Figure 1. Installing sleeve guard.

Machine Inventory

(See Page 6)

The following items have been added. Refer to
the full manual for a description of the main inven-
tory.

Box Contents:

Qty

A. Sleeve Guard ............................................ 1

B. Lock Knobs ............................................... 2

C. Flat Washers #10 ....................................... 2

New Sleeve Guard Parts

Idler Roller

Guard

Sleeve Guard

Lock Knob

#10 Flat

Washer

REF

PART #

DESCRIPTION

114A

P1014Z114A

IDLER ROLLER GUARD V2.03.08

114A-1 P1014Z114A-1 SLEEVE GUARD
126

P1014Z126

LOCK KNOB

127

PW03

FLAT WASHER #10

114A-1

127

126

127

126

114A

Figure 2. New sleeve guard parts.