Milwaukee 6236N 사용자 설명서

• Keep work area clean and well lit. Cluttered or 

dark areas invite accidents.

spheres, such as in the presence of fl ammable 
liquids, gases or dust. Power tools create 
sparks which may ignite the dust or fumes.

operating a power tool. Distractions can cause 
you to lose control.

modify the plug in any way. Do not use any 
adapter plugs with earthed (grounded) power 
tools. Unmodifi ed plugs and matching outlets will 
reduce risk of electric shock.

surfaces such as pipes, radiators, ranges and 
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.

ditions. Water entering a power tool will increase 
the risk of electric shock.

carrying, pulling or unplugging the power tool. 
Keep cord away from heat, oil, sharp edges 
or moving parts. Damaged or entangled cords 
increase the risk of electric shock.

an extension cord suitable for outdoor use. 
Use of a cord suitable for outdoor use reduces 
the risk of electric shock.

is unavoidable, use a residual current device 
(RCD) protected supply. Use of an RCD reduces 
the risk of electric shock.

wear eye protection. Protective equipment such 
as dust mask, non-skid safety shoes, hard hat, or 
hearing protection used for appropriate conditions 
will reduce personal injuries.

switch is in the off-position before connecting 
to power source and/or battery pack, picking 
up or carrying the tool. Carrying power tools 
with your fi nger on the switch or energising power 
tools that have the switch on invites accidents.

turning the power tool on. A wrench or a key 
left attached to a rotating part of the power tool 
may result in personal injury. 

balance at all times. This enables better control 
of the power tool in unexpected situations.

jewellery. Keep your hair, clothing and gloves 
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts. 

dust extraction and collection facilities, ensure 
these are connected and properly used. Use of 
dust collection can reduce dust-related hazards.

power tool for your application. The correct 
power tool will do the job better and safer at the 
rate for which it was designed.

not turn it on and off. Any power tool that cannot 
be controlled with the switch is dangerous and 
must be repaired.

and/or the battery pack from the power tool 
before making any adjustments, changing 
accessories, or storing power tools. Such 
preventive safety measures reduce the risk of 
starting the power tool accidentally.

dren and do not allow persons unfamiliar with 
the power tool or these instructions to operate 
the power tool. Power tools are dangerous in the 
hands of untrained users.

or binding of moving parts, breakage of parts 
and any other condition that may affect the 
power tool’s operation. If damaged, have the 
power tool repaired before use. Many accidents 
are caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly 

maintained cutting tools with sharp cutting edges 
are less likely to bind and are easier to control.

etc., in accordance with these instructions, 
taking into account the working conditions 
and the work to be performed. Use of the power 
tool for operations different from those intended 
could result in a hazardous situation.

repair person using only identical replacement 
parts. This will ensure that the safety of the power 
tool is maintained.

common sense when operating a power tool. 
Do not use a power tool while you are tired or 
under the infl uence of drugs, alcohol or medi-
cation.  A moment of inattention while operating 
power tools may result in serious personal injury.

es, when performing an operation where the 
cutting accessory may contact hidden wiring 
or its own cord. Cutting accessories contacting 
a “live” wire may make exposed metal parts of 
the power tool “live” and could give the operator 
an electric shock.

•  Maintain labels and nameplates.  These carry 

important information.  If unreadable or missing, 
contact a MILWAUKEE service facility for a free 
replacement.

No Load Surface Feet per Minute

Volts Alternating Current

Volts Alternating/Direct Current

Amps

Underwriters Laboratories, Inc., 
United States and Canada

1. Trigger

2. Handle

3.  Work steady rest

4. Blade

5.  Tension lock handle

6. Front 

handle

7.  Speed dial (Cat. No. 6230N)

8.  Two-speed switch (Cat. No. 6236N)

7

6

3

4

5

• WARNING: Some dust created by power sand-

ing, sawing, grinding, drilling, and other construc-
tion activities contains chemicals known to cause 
cancer, birth defects or other reproductive harm. 
Some examples of these chemicals are:

•  lead from lead-based paint

•  crystalline silica from bricks and cement and other 

masonry products, and

• arsenic and chromium from chemically-treated 

lumber.

  Your risk from these exposures varies, depend-

ing on how often you do this type of work. To 
reduce your exposure to these chemicals: work 
in a well ventilated area, and work with approved 
safety equipment, such as those dust masks that 
are specially designed to fi lter  out  microscopic 
particles.

2

1

8