Wacom DTU-710 사용자 설명서
2
CAUTION
WARNING
■ Do not use DTU-710 Interactive Pen Display in a facility control system
that requires extremely high reliability;
it may cause other electronic devices
to malfunction, or other devices may cause DTU-710 to malfunction. Where
use is prohibited, power off DTU-710 to prevent the possibility of it causing
other electronic devices to malfunction. Wacom does not accept any liability
for direct or consequential damages. For details, please refer to your Warranty,
located at the inside back cover of this manual.
use is prohibited, power off DTU-710 to prevent the possibility of it causing
other electronic devices to malfunction. Wacom does not accept any liability
for direct or consequential damages. For details, please refer to your Warranty,
located at the inside back cover of this manual.
■ Only use the AC adaptor that came with DTU-710.
If a different type of AC
adaptor is used, DTU-710 will not work properly or it may be damaged. Using a
different type of AC adaptor also has the potential to result in fire.
different type of AC adaptor also has the potential to result in fire.
Use of
a different AC adaptor will void your warranty.
■
If the LCD screen has been damaged, DO NOT touch any liquid that may
be leaking from it;
this liquid is an irritant. In case of contact with skin, eyes,
or mouth, rinse immediately with running water for at least 15 minutes or more.
If contact is made with the eyes or mouth, also consult a physician.
If contact is made with the eyes or mouth, also consult a physician.
■
Prevent your children from swallowing the pen nib or side switch knob.
The pen nib or side switch knob may accidentally be pulled out if children are
biting on them.
biting on them.
■ HIGH VOLTAGE
. Do not open DTU-710. It has the risk of electric shock.
Precautions on Use and Handling
Be sure to follow all instructions, cautions, and warnings found within this manual.
Failure to do so could cause the loss of data or damege of your computer. Failure to do
so could also void your warranty, in which case Wacom shall have no responsibility for
such loss or damage and to repair or replace the product.
Failure to do so could cause the loss of data or damege of your computer. Failure to do
so could also void your warranty, in which case Wacom shall have no responsibility for
such loss or damage and to repair or replace the product.
■ When adjusting the tilt angle of DTU-710, be careful to avoid catching
your finger in the gap of the movable portion of the stand.
■ Be sure to use a grounded power source when applying power to
DTU-710.
■ Do not lift DTU-710 by the stand;
this may damage the stand mechanism.
When lifting or moving DTU-710, always do so by grasping the main body
casing.
casing.