Radio Shack PRO-90 사용자 설명서
24
Your scanner has the following preprogrammed service
banks.
banks.
• POLICE — contains 1,079 police frequencies.
• FIRE/EMG — contains 280 fire and emergency ser-
vice frequencies.
• AIR — contains 2,319 aircraft and air service fre-
quencies.
• MRN contains 65 marine frequencies.
• WX — contains 7 weather frequencies.
To select a service bank, press
SVC
. A service bank’s
name
(POLICE
,
FIRE/EMG
,
AIR
,
MRN
, or
WX)
and
one of the preset police frequencies appear. After a 2-
second delay, scanning begins. To select another ser-
vice bank, repeatedly press
second delay, scanning begins. To select another ser-
vice bank, repeatedly press
SVC
until the scanner dis-
plays the name of the bank you want to use.
Notes:
• In the marine band, the active frequency and its
marine channel number alternately appear.
• To skip data signals (such as modem signals), press
DATA
. See “Skipping Data Signals” on Page 31.
• Because frequencies are not always assigned to the
same services everywhere, you might hear transmis-
sions from one service in another service group.
sions from one service in another service group.
If necessary, press
SCAN
to start scanning immediately
or to continue scanning if you want to skip a frequency.
During service-scan, you can press
HOLD
to pause the
scanning.
HOLD
appears. Press s or t to move up or
down one step, or press
SCAN
to resume scanning.
Follow these steps to store frequencies into channels.
1. Press
MANUAL
.
HOLD
appears.
2. Use the number keys to enter the channel number
(1–300) where you want to store the frequency, then
press
press
MANUAL
.
3. Press
SVC
to select a service bank and begin scanning.
4. When the scanner stops on a transmission, press
HOLD
. The frequency appears.
5. Press
E
to store the frequency into the channel.
20-520.fm Page 24 Wednesday, August 4, 1999 3:06 PM