Toshiba 203S 사용자 설명서
CONVENIENT COPY FUNCTIONS
27
4
Using the document glass (e-STUDIO203SD only)
1
Place the original that you wish to copy onto the front side of
the paper on the document glass and close the document
cover/RADF.
the paper on the document glass and close the document
cover/RADF.
2
Press the [2-SIDED COPY] key until "1 TO
2" appears, and then press the [ENTER]
key.
2" appears, and then press the [ENTER]
key.
3
Press the [
] key (
) or [
] key (
) to
select the binding edge and then press the
[ENTER] key.
[ENTER] key.
Select "LONG EDGE" or "SHORT EDGE".
The "LONG EDGE" and "SHORT EDGE" are
shown in the illustration on the preceding page.
The "LONG EDGE" and "SHORT EDGE" are
shown in the illustration on the preceding page.
4
Select the number of copies and any other settings, and then
press the [START] key (
press the [START] key (
).
"[START] : NEXT SCAN [#] : START PRINT" appears and the original is
scanned into memory.
To immediately print the scanned image, press the [
scanned into memory.
To immediately print the scanned image, press the [
] key.
5
Replace the original with the next
original and close the document
cover/RADF, and then press the
[START] key (
original and close the document
cover/RADF, and then press the
[START] key (
).
Repeat step 5 until all originals have been
scanned.
Copies will be output each time two originals
have been scanned.
When the number of original pages is odd
and "[START] : NEXT SCAN [#] : START PRINT" appears, press the [
scanned.
Copies will be output each time two originals
have been scanned.
When the number of original pages is odd
and "[START] : NEXT SCAN [#] : START PRINT" appears, press the [
]
key after all pages have been scanned.
• If you need to clear the data scanned into memory, press the
[CLEAR] key (
). When the [CLEAR] key (
) is pressed, the
number of copies setting is also cleared.
• To cancel automatic two-sided copying, press the [CLEAR ALL] key
(
) or press the [2-SIDED COPY] key, select the "1 TO 1", and then
press the [ENTER] key.
• If the special function sort mode was selected in step 4, copying will
not begin until the [
] key is pressed.
2-SIDED COPY
1 TO 2
1 TO 2
BINDING EDGE
LONG EDGE
LONG EDGE
1
The first original The second original
2
Note