Toshiba 203S 사용자 설명서

 *

1

The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED", 
however, the printing speed does not increase considerably.

 *

2

When the 250-sheet paper feed unit is installed.

Setting codes
(factory default

setting appears

in bold)

1

FORCED 
OUTPUT

1: ON
2: OFF

• When this function is enabled, 

printing in printer mode will 
automatically continue using a 
different size of paper if the 
specified size of paper runs 
out in all trays. This feature 
does not function in copy 
mode.

2

USB 2.0 MODE 
SWITCH*

1

1: FULL-SPEED
2: HI-SPEED

• This sets the USB 2.0 data 

transfer speed. To obtain the 
fastest speed when using the 
USB 2.0 connector, first verify 
that your computer meets the 
system requirements 
(operating system and driver), 
and then use this program to 
change the USB 2.0 mode to 
"Hi-Speed". Note that the 
setting should not be changed 
while running a TWAIN driver. 
(For the system requirements, 
see "System requirements for 
USB 2.0 (Hi-Speed mode)" 
(p.49).)

3

AUTO TRAY 
SWITCH*

2

1: ON
2: OFF

• If the paper runs out during 

printing and there is paper of 
the same size in another tray, 
this function automatically 
switches to that tray 
(excluding the bypass tray). 
The function can be disabled.