Toshiba 203S 사용자 설명서

When a misfeed occurs, the error indicator blinks, "CLEAR PAPER JAM" appears in 
the display, and the machine stops operating. If a misfeed occurs when using the 
RADF, "RETURN X ORIGINAL(S) START TO RESUME" will appear in the display. 
("X" indicates the number of pages to be returned.). This indicates the number of the 
originals that must be returned to the document feeder tray after a misfeed. Return 
the required number of originals. This number will be cleared when copying is 
resumed or the [CLEAR] key (

) is pressed. If an original misfeed occurs in the 

RADF, the machine will stop and the error indicator will blink. To remove a misfeed 
from the RADF, see "D: Misfeed in the RADF (Option)" (p.73).

Check the misfeed location. Remove the misfed paper 
following the instructions for each location in the illustration 
below. If the error indicator blinks, proceed to "A: Misfeed in 
the paper feed area" (p.71).

If paper is misfed here, proceed to "A:  
Misfeed in the paper feed area". (p.71)

If paper is misfed here, proceed to "B:  
Misfeed in the fusing area". (p.71)

If the misfed paper is seen from 
this side, proceed to "C: Misfeed 
in the transport area". (p.72)