JVC GV-L52 사용자 설명서

14

5.  Set the image quality.
  After successfully logging in, the window for selecting 

the image quality to use for streaming is displayed. The 
image quality setting can be changed later at any time 
using the [IMAGE QUALITY SETTINGS] button.

  However, note that USTREAM Producer needs to be 

restarted to reflect this setting.

[MPEG-2 TS (HD)]

• 

  The image quality is high, but the load on the computer 

is also high and a large amount of data is transmitted 
across the network.

  Select when the only one camera is used, the camera 

is connected in a wired LAN and you are using a high 
speed computer.

[MPEG-2 TS (SD)]

• 

  The image quality is not as good, but the load on the 

computer is lower and less data is transmitted across the 
network.

  Select this when using a wireless LAN, multiple cameras 

or a standard computer.

[AAC SOUND ONLY.]

• 

  Select this to use the camera audio only.

6.  When using multiple cameras, repeat steps 3 to 5.

7.  Exit the setup application.
  Exit the setup application by closing the window.

Chapter 4  Streaming in Real-Time with USTREAM