Epson 4870 사용자 설명서

EPSON Perfection 4870 Series

12/03

EPSON Perfection 4870 Series - 3

4. Click the 

Preview

 button at the bottom of the screen. Your 

photo appears in the Preview window.

5. Click the   button to select the image area to be scanned. 

Adjust the marquee if necessary.

6. Do one of the following:

❏ If you’re using Home Mode, click the 

Image 

Adjustments

 button.

❏ If you’re using Professional Mode, scroll to the bottom 

of the screen.

7. Select the 

Digital ICE

 or 

Color Restoration

 checkbox:

❏ If your photo is dirty, scratched, creased, or torn, select 

Digital ICE

.

❏ If the colors in your photo are faded, select 

Color 

Restoration

.

Note: 
You can select both settings if necessary.

8. Click the 

Scan

 button.

9. Click the 

Close

 button. Your image now appears in 

Photoshop Elements.

Before scanning transparent documents, you need to remove 
the scanner’s reflective document mat; this exposes the scanner’s 
transparency unit (light source), which is built into the lid. 

If you’re scanning slides or film strips, you’ll also need to use 
one of the film holders.

1. Make sure the transparency unit cable is connected to the 

option interface connector on the back of the scanner. 
(If it is not connected, turn off the scanner, connect the 
transparency unit cable, then turn the scanner back on.)

2. Lift the scanner lid all the way up and pull the reflective 

document mat up and off of the scanner lid, as shown.

3. If you are scanning film or negatives, open the cover, then 

slide the film into the corresponding holder, with the film’s 
shiny base side facing down. (If you are scanning slides, go 
to step 6.)