Epson II 사용자 설명서

Be careful not to scratch the chip or the board

when removing the chip.

6. With the chip properly inserted, push down firmly on both ends

of the chip to make sure it is well-seated.

7. Repeat steps 3 through 6 for each of the three remaining chips.

To install the memory expansion board, you need a cross-head

screwdriver.

Do not remove any screws other than the

brass-colored screws specified in the following steps.

Do not attempt to install the memory board

unless the printer is turned off and the power cord is

unplugged. Also, try not to touch any contacts on the

circuit board of the printer; many of the components can

be destroyed by the static electricity in your body.