Epson II 사용자 설명서

If the message REMOVE CARD appears on the

display, you inserted the cartridge when 

the 

printer was

on line or when the printer’s memory contained data. If

you see this message, remove the cartridge, press

CONTINUE; 

then return to 

step 

1.

6. If the power is 

on, 

press 

ON LINE 

to set the printer on line. If the

power is off, turn 

on 

the printer.

Now that you have inserted a font cartridge, you can select the fonts

you want to print using your application program or SelecType.

When 

the 

printer is in HP emulation mode, you can use your

application program to select the fonts you want to use. First be sure

you selected HP LaserJet IIP or a similar printer 

from 

the program’s

setup or installation menu. For more information on which printers

to choose when you set up your application program, see Using

Your Printer with Application Software in Chapter 3. After you set

up your application program, you can specify the fonts you want

using the commands available in the program.

If your program does not provide commands that allow you to select

the font you want, you can select fonts using SelecType menus or

printer command sequences. Most application programs, however,

allow you to select fonts, and you should 

not have to 

use SelecType

or printer commands to do so. To select a font using SelecType, see

Choosing a Font, Chapter 4. For information on printer commands,

see Appendix D. Also see your software manual for information on

how 

to use printer command sequences.