Fujitsu M3093EX 사용자 설명서
4 – 2
4.2
Reading a Document in Flatbed Mode
This section explains how to read a document placed on the document
bed.
bed.
4.2.1
Reading a standard-size document
If the size of the document is smaller than the document bed, read the
document using the following procedure:
document using the following procedure:
1
Open the document cover.
2
Place the document face down on the document board. Correct
any curled or folded parts of the document.
any curled or folded parts of the document.
3
Position the long side (in landscape mode) or the short side (in
portrait mode) of the document to the left side of the document
bed.
portrait mode) of the document to the left side of the document
bed.
4
Position the left top of the document to the reference mark. If the
document is not placed correctly, reading cannot be done cor-
rectly.
document is not placed correctly, reading cannot be done cor-
rectly.
5
Close the document cover slowly. If the document cover is
closed too quickly, the document may move.
closed too quickly, the document may move.
6
Read the document. Do not press on or open the document cover
during the read operation.
during the read operation.
7
After reading, open the document cover to remove the document.