Fujitsu LT800P 사용자 설명서

Troubleshooting

11

This section contains troubleshooting information, including causes and actions, for 
problems you may find while using this device. 

Troubleshooting Table 

11

An exclamation 
mark (!) or cross (x) 
is attached to 
[Intersil PRISM 
Wireless LAN PCI 
Card].

A failure to 
recognize the 
device.

Restart the computer.

A failure in 
installing the driver.

Restart the computer.

Other computers 
are not displayed 
when the [Network 
Computer] icon is 
double-clicked.

The network has 
not been set up 
correctly.

Check the setting for the protocol, work-
group, and sharing.

To check this, you need a different proce-
dure, depending upon the operating 
system that you use. Refer to the appro-
priate section of this chapter.

It takes time before 
the network is 
searched and the 
computer 
connected is 
displayed.

Perform the following steps to search for 
the computer.

■

Click [Start] -> [Search] -> [Other 
Computers].

■

Enter the computer name that you are 
connecting to in [Name], and click 
[Search].

■

Double-click the icon of the computer 
that has been searched.

A failure in 
installing the driver.

Make sure that the driver is correctly 
installed.

The TCP/IP 
protocol is not 
installed, or, the IP 
address is not set 
correctly.

Make sure that the TCP/IP protocol is 
installed. To check this, you need a 
different procedure, depending on the 
operating system that you use. Refer to 
the appropriate section of this manual.

58-0867-01.book  Page 88  Thursday, February 13, 2003  1:18 PM