Alcatel Carrier Internetworking Solutions 4324 사용자 설명서

Part 031640-00

May 2005

Verify you understand the procedure and all precautions.

Before beginning, read the entire procedure. Verify you understand all the 
precautions in these steps as well as those on 

.

Verify that your site’s electrical system is compatible with the 
switch.

The switch power input is auto-ranging and accepts 90~132/180~264 VAC, 50 
to 60 Hz, 4.0/2.0 A.

—Use of a power line conditioner or Uninterruptible Power Supply (UPS) 

can decrease or mitigate problems caused by power service fluctuations. Ver-
ify that the output of any power shaping device is compatible with the Alcatel 
Wireless LAN Switch power supplies.

Verify that the switch power supply can handle the POE devices.

The total power drawn by all connected Power Over Ethernet (POE) devices 
must not exceed 200 W total. For details, see 

 on 

.

Attach the power cord to the power input socket at the back of 
the switch.

Plug an appropriate power cord into the power input socket. Use the included 
power cord if it is compatible with your electrical outlet. Otherwise, replace the 
power cord with the type appropriate for your country. The power input socket 
accepts a power cord with a standard IEC320 connector.

Attach the power cord to a proper electrical outlet.

Once power is connected, the switch will automatically turn on and you can 
perform the power-on test (see 

—This procedure should be performed by a trained technician.

—For proper safety and performance, the power cord must be 

rated to 10 A and conform to grounded electrical standards in the 
country where the product is operated.