Alloy Computer Products GSM-24T2SFP 사용자 설명서

13 

Alloy Computer Products Pty Ltd Copyright ©2006

 

To set or change the default IP address of the switch via the console port, please follow the steps 
below: 

1.  Log into the switch via hyper terminal using the above settings. 

 

 

                                               

 

2. Type 

IP and press Enter to enter the IP configuration mode. 

3. Type 

set ip “IP Address” “Subnet Mask” “Gateway” where “IP Address” is the IP 

address of the switch, “Subnet Mask” is the subnet mask of the switch and “Gateway” is 
the gateway address of the switch, then press Enter. 

4. Type 

save start to save the new switch configuration as the startup configuration for the 

switch. 

5. Type 

logout to exit the switch’s management.