Sony 8000SF 사용자 설명서
430
Resizer
Chap
2
Set the parameters.
This operation is the same as the DME mosaic setting. For more details,
see “Mosaic Settings” in Chapter 11 (Volume 2).
see “Mosaic Settings” in Chapter 11 (Volume 2).
3
In the < Mosaic/Defocus Mode > group, select the signal to which to apply
the mosaic effect.
the mosaic effect.
Video/Key: Video signal and key signal
Video: Video signal only
Video: Video signal only
Note
If mosaic is enabled, and in the <Mosaic/Defocus Mode> group you select
Video/Key, then the crop and mask are disabled.
Video/Key, then the crop and mask are disabled.
4
Set the parameters.
To make the mosaic like a relief pattern
1
With [Mosaic] on, press [Relief], turning it on.
2
In addition to the mosaic parameters, set the following parameters.
Defocusing
1
In the M/E-1 >Key1 >Processed Key >Enhanced Effect menu, press
[Defocus], turning it on.
[Defocus], turning it on.
2
Set the parameters.
This operation is the same as the defocusing setting when using the DME
with the DME dedicated interface. However, <Mosaic/Defocus Mode>
appears in place of <Defocus Mode>. For more details, see “Defocus
Settings” in Chapter 11 (Volume 2).
with the DME dedicated interface. However, <Mosaic/Defocus Mode>
appears in place of <Defocus Mode>. For more details, see “Defocus
Settings” in Chapter 11 (Volume 2).
Knob
Parameter
Adjustment
Setting values
1
H
Horizontal defocusing
0.00 to 100.00
2
V
Vertical defocusing
0.00 to 100.00
3
All
Horizontal and vertical defocusing H value shown
Knob
Parameter
Adjustment
Setting values
3
Gain
Relief depth of mosaic cells
0.00 to 100.00
4
Angle
Light source direction
–8.00 to +8.00